USB Mobile Phone Charger | Car Charger | 5V Charger

Introduction

Imagine you’re traveling in your car by using the maps on your mobile phone and suddenly the battery of your phone get died. Now, you have neither an electrical socket for charging nor the maps to travel. Hence this situation is difficult to handle and makes you concerned and questionable. But, every problem arises with its solution. So is it possible that there is no answer to your question? And, the answer is hidden in your own car. Yes!! you can charge the mobile device in your own car. You just need a little electronic knowledge. So, in this tutorial, we are making a 5 Volt USB Mobile / Car Charger using LM7805 – DIY Project

Remember that the voltage of the car can vary considerably which can create spikes and surges. Therefore, to protect the charger, you must have to be aware. Because this can also create damage to the mobile device. However, it helps the device to get charged faster.

PCBWay commits to meeting the needs of its customers from different industries in terms of quality, delivery, cost-effectiveness, and any other demanding requests. As one of the most experienced PCB manufacturers in China. They pride themselves to be your best business partners as well as good friends in every aspect of your PCB needs.

5$ PCB Prototype

Hardware Components

The following components are required to make USB Mobile Phone Charger Circuit

S.no	Component	Value	Qty
1.	PCB	–	1
2.	Car Battery	12V	1
3.	Regulator IC	7805	1
4.	Electrolyte Capacitor	0.33uf, 0.1uf	1, 1
5.	USB port Terminal	–	1
6.	2 input port terminal	–	1

7805 Pinout

For a detailed description of pinout, dimension features, and specifications download the datasheet of 7805

USB Mobile Phone Charger Circuit

Working Explanation

Firstly, make the circuit according to the diagram given. For understanding, watch the video tutorial by clicking the below-given link.

The circuit of the car charger uses the LM7805 voltage regulator IC. The Three terminal IC accepts the car battery voltage and regulates it to 5 volts. The regulator works greatly against the voltage fluctuations that may happen due to the battery connected to the circuit. Then it provides the 5V voltage to the USB port where the mobile phone is already connected. Hence the charging gets started. Before connecting the device make sure to check through the multimeter that the circuit is providing 5V.

Application and Uses

This circuit can be used to charge various numbers of electronic devices like smartphones, tablets, etc.