TLC5628CN 8-bit D/A Converter 8 Channel – Datasheet

1,310 views

The TLC5628CN is octal 8-bit voltage output digital-to-analog converters (DACs) with buffered reference inputs (high impedance). The DACs produce an output voltage that ranges between either one or two times the reference voltages and GND and are monotonic. The device is simple to use, running from a single supply of 5 V. A power-on reset function is incorporated to ensure repeatable start-up conditions. Digital control of the TLC5628C and TLC5628I are over a simple three-wire serial bus that is CMOS compatible and easily interfaced to all popular microprocessor and microcontroller devices.

The 12-bit command word comprises eight bits of data, three DAC select bits, and a range bit, the latter allowing selection between the times 1 or times 2 output range. The DAC registers are double buffered, allowing a complete set of new values to be written to the device, then all DAC outputs are updated simultaneously through control of LDAC. The digital inputs feature Schmitt triggers for high-noise immunity.

TLC5628 8-bit DtoA Converter 8 Channel

TLC5628CN Pinout

TLC5628CN Pin Configuration

Pin NoPin NameDescription
1DACBDAC B analog output
2DACADAC A analog output
3GNDGround Pin
4DATASerial interface digital data input
5CLKSerial interface clock
6VDDPositive supply voltage
7DACEDAC E analog output
8DACFDAC F analog output
9DACGDAC G analog output
10DACHDAC H analog output
11REF2Reference voltage input to DAC E|F|G|H
12LOADSerial interface load control
13LDACLoad DAC
14REF1Reference voltage input to DAC A|B|C|D
15DACDDAC D analog output
16DACCDAC C analog output

TLC5628CN Features

  • Eight 8-Bit Voltage Output DACs
  • 5-V Single-Supply Operation
  • Serial Interface
  • High-Impedance Reference Inputs
  • Programmable 1 or 2 Times Output Range
  • Simultaneous Update Facility
  • Internal Power-On Reset
  • Low-Power Consumption
  • Half-Buffered Output

Application

  • Programmable Voltage Sources
  • Digitally Controlled Amplifiers/Attenuators
  • Mobile Communications
  • Automatic Test Equipment
  • Process Monitoring and Control
  • Signal Synthesis

You can download this datasheet for TLC5628CN 8-bit D/A Converter 8 Channel from the link given below: