TLC5620CN 8-bit D/A Converter 4 Channel – Datasheet

2,187 views

The TLC5620CN is quadruple 8-bit voltage output digital-to-analog converters (DACs) with buffered reference inputs (high impedance). The DACs produce an output voltage that ranges between either one or two times the reference voltages and GND, and the DACs are monotonic. The device is simple to use, running from a single supply of 5 V. A power-on reset function is incorporated to ensure repeatable start-up conditions. Digital control of the TLC5620C and TLC5620I are over a simple three-wire serial bus that is CMOS compatible and easily interfaced to all popular microprocessor and microcontroller devices. The 11-bit command word comprises eight bits of data, two DAC-select bits, and a range bit, the latter allowing selection between the times 1 or times 2 output range.

The DAC registers are double buffered, allowing a complete set of new values to be written to the device, then all DAC outputs are updated simultaneously through control of LDAC.

TLC5620CN Pinout

TLC5620CN Pin Configuration

Pin NoPin NameDescription
1GNDGround Pin
2REFAReference voltage input to DAC A.
3REFBReference voltage input to DAC B
4REFCReference voltage input to DAC C
5REFDReference voltage input to DAC D
6DATAData Pin
7CLKSerial interface clock
8LOADSerial Interface load control
9DACDDAC D analog output
10DACCDAC C analog output
11DACBDAC B analog output
12DACADAC A analog output
13LDACLoad DAC
14VDDSupply Voltage

TLC5620CN Features

  • Four 8-Bit Voltage Output DACs
  • 5-V Single-Supply Operation
  • Serial Interface
  • High-Impedance Reference Inputs
  • Programmable 1 or 2 Times Output Range
  • Simultaneous Update Facility
  • Internal Power-On Reset
  • Low-Power Consumption
  • Half-Buffered Output

Application

  • Programmable Voltage Sources
  • Digitally Controlled Amplifiers/Attenuators
  • Mobile Communications
  • Automatic Test Equipment
  • Process Monitoring and Control
  • Signal Synthesis

You can download this datasheet for TLC5620CN 8-bit D/A Converter 4 Channel from the link given below: