TL032 JFET-input operational amplifiers offer improved dc and ac characteristics over the conventional low-power BiFET operational amplifiers. The IC has range of working conditions a wide range of working voltages, and possesses direct interfacing capability with almost every PMOS, CMOS, and NMOS device. Moreover, the IC offers a wide array of features such as high noise immunity, ESD barring/reduction, and exceptionally low power dissipation.
Operational Amplifier
An operational amplifier is one of the basic building blocks for analog circuits, An operational amplifier takes in differential voltage input and produces a single-ended voltage output. The basic purpose of employing an operational amplifier in an analog circuit is to perform the function of signal amplification: The process of boosting an electrical signal of low strength to a level of higher amplitude. Op-amps also function as a filter of the input signal; meaning that, an operational amplifier is able to extract the signal with the target frequency. Op-amps can be divided into two fundamental parts:
- Precision Op-amps
- Differential Op-amps
TL032 Pinout
TL032 Pin Configuration
| Pin No | Pin Name | Description |
|---|---|---|
| 1 | OUT 1 | Output Of Amplifier 1 |
| 2 | INV-INPUT 1 | Inverting Input Of Amplifier 1 |
| 3 | NON-INV-INPUT 1 | Non Inverting Input Of Amplifier 1 |
| 4 | VCC- | Negative Supply Voltage |
| 5 | NON-INV-INPUT 2 | Non Inverting Input Of Amplifier 2 |
| 6 | INV-INPUT 2 | Inverting Input Of Amplifier 2 |
| 7 | OUT 2 | Output Of Amplifier 2 |
| 8 | VCC+ | Positive Supply Voltage |
TL032 Features
- Direct Upgrades for the TL06x Low-Power BiFETs
- Low Power Consumption… 6.5 mW/Channel Typ
- On-Chip Offset-Voltage Trimming for Improved DC Performance (1.5 mV, TL031A)
- Higher Slew Rate and Bandwidth Without Increased Power Consumption
Application
- dc-coupled
- audio-distribution amplifier
- U1Aamplifies the input signal with a gain of 10, while U1B, U1C, and U1D serve as buffers to the output channels. The gain response of this circuit is very flat from 20 Hz to 20 kHz. The TL03x allows quick response to the input signal while maintaining low power consumption
TL032 Datasheet
You can download this datasheet for TL032 Enhanced JFET Op-Amp from the link given below:
See Also: CD4069 Hex Inverter – Datasheet | CD4053 Triple 2-channel Multiplexer/Demultiplexer – Datasheet | CD4029 Binary-Decade Up-Down Counter – Datasheet
