Contents
hide
The TDA7375V is a new technology class AB car radio amplifier able to work either in DUAL BRIDGE or QUAD SINGLE ENDED configuration. The exclusive fully complementary structure of the output stage and the internally fixed gain guarantees the highest possible power performances with the extremely reduced component count. The on-board clip detector simplifies gain compression operation. The fault diagnostics makes it possible to detect mistakes during car radio set assembly and wiring in the car
TDA7375 Pinout
TDA7375 Pin Configuration
| Pin No | Pin Name | Description |
|---|---|---|
| 1 | OUT 1 | Output 1 |
| 2 | OUT 2 | Output 2 |
| 3 | VCC | Collector Supply Voltage |
| 4 | IN 1 | Input 1 |
| 5 | IN 2 | Input 2 |
| 6 | SVR | Supply Voltage Rejection |
| 7 | ST-BY | Stand By |
| 8 | PW-GND | Power Ground |
| 9 | S-GND | Signal Ground |
| 10 | DIAG: | Diagnostics |
| 11 | IN 4 | Input 4 |
| 12 | IN 3 | Input 3 |
| 13 | VCC | Collector Supply Voltage |
| 14 | OUT 4 | Output 4 |
| 15 | OUT 3 | Output 3 |
TDA7375 Key Features
- High Output Power Capability:
- 2 x 40W max./4Ω
- 2 x 35W/4Ω EIAJ
- 2 x 35W/4Ω EIAJ
- 2 x 25W/4Ω @14.4V, 1KHz, 10%
- 4 x 7W/4Ω @14.4V,1KHz, 10%
- 4 x 12W/2Ω @14.4V, 1KHz, 10%
- Minimum External Components Count:
- No Bootstraps Capacitors
- No Boucher Cells
- Internally Fixed Gain (26dB BTL)
- ST-BY Function (CMOS COMPATIBLE)
- NO AUDIBLE POP During ST-BY Operation
Application
You can download this datasheet for TDA7375 2 x 35W Dual/Quad Power Amplifier from the link given below:
