TDA1554Q Four Amplifier IC – Datasheet

5,919 views

The TDA1554Q is an integrated class-B output amplifier in a 17-lead single-in-line (SIL) plastic power package. The circuit contains 4 x 11 W single-ended or 2 x 22 W bridge amplifiers. The device is primarily developed for car radio applications.

Functional Description

The TDA1554Q contains four identical amplifiers with differential input stages (two inverting and two non-inverting) and
can be used for single-ended or bridge applications. The gain of each amplifier is fixed at 20 dB (26 dB in BTL). A special
feature of this device is:

  • Low stand-by current (< 100 µA)
  • Low mute/stand-by switching current (low cost supply switch)
  • Mute facility

TDA1554 Pinout

TDA1554 Pin Configuration

Pin NoPin NameDescription
1NINV1Non-Inverting Input 1
2INV1Inverting Input 1
3GNDGround Signal
4RRSupply Voltage Ripple Rejection
5VP1Positive Supply Voltage 1
6OUT1Output 1
7GND1Power Ground 1 (Substrate)
8OUT2Output 2
9N.CNo Connection
10OUT3Output 3
11GND2Power Ground 2 (Substrate)
12OUT4Output 4
13VP2Positive Supply Voltage 2
14M/SSMute/Stand-By Switch
15N.CNo Connection
16INV2Inverting Input 2
17NINV2Non-Inverting Input 2

TDA1554 Features

  • Requires very few external components
  • Flexibility in use − Quad single-ended or stereo BTL
  • High output power
  • Low offset voltage at outputs (important for BTL)
  • Fixed gain
  • Good ripple rejection
  • Mute/stand-by switch
  • Load dump protection
  • AC and DC short-circuit-safe to ground and VP
  • Thermally protected
  • Reverse polarity safe
  • Capability to handle high energy on outputs (VP = 0 V)
  • Protected against electrostatic discharge
  • No switch-on/switch-off plop
  • Low thermal resistance
  • Identical inputs (inverting and non-inverting)
  • Flexible leads

Application

You can download this datasheet for TDA1554Q Four Amplifier IC from the link given below: