OP90 Precision Low-Voltage Micro-power Op-Amp Datasheet

3,132 views

OP90 is a high performance, micropower op amp that operates from a single supply of 1.6 V to 36 V or from dual supplies of ±0.8 V to ±18 V. The input voltage range includes the negative rail allowing the OP90 to accommodate input signals down to ground in a single-supply operation. The OP90’s output swing also includes a ground when operating from a single-supply, enabling “zero-in, zero-out” operation.

Precision operational amplifier

A Precision operational amplifier is an operational amplifier with better design specifications and topology than the conventional op-amp. Precision Op-amps are more accurate than your average general-purpose op-amps. In terms of design topology, Precision amplifiers have a better precision offset, zero-drift over time, lower internal noise (nV/√Hz), and input bias current. On the component scale, they have precise matching resistors etched in the substrate at the chip level.


For Example; a LM741 op-amp, has an offset voltage of 5mV. The offset voltage signifies the voltage that the user has to apply between the +ve and -ve of the IC, in order to get an output of 0V. On configuring the op-amp to operate at a gain of 100. The gain will not only multiply the input signal, but it will also multiply the offset voltage. This will result in the output voltage being off-value by a factor of +/-0.5V. On considering the OP177; a precision op-amp, with an offset voltage of 25uV. The same gain value of 100, would produce an error of only 2.5mV in a signal that has been amplified by a factor of 100.

OP90 Pinout

OP90 Pin Configuration

Pin NoPin NameDescription
1VOS NULL 1Input Offset Voltage Null Pin 1
2INV-INPUTInverting Input Of Amplifier
3NON-INV-INPUTNon Inverting Input Of Amplifier
4V-Negative Power Supply
5VOS NULL 2Input Offset Voltage Null Pin 2
6OUTOutput
7V+Positive Power Supply
8NCNo Connection

OP90 Features

  • Low Supply Current: 20 A Max
  • High Output Drive: 5 mA Min
  • Low Input Offset Voltage: 150 V Max
  • High Open-Loop Gain: 700 V/mV Min
  • Outstanding PSRR: 5.6 V/V Max
  • Standard 741 Pinout with Nulling to V–
  • True Single-Supply Operation; Input and Output Voltage Ranges Include Ground

Application Information

  • Battery-Powered Voltage Reference
  • Single Op Amp Full-Wave Rectifier
  • Micro power Voltage-Controlled Oscillator

OP90 Datasheet

You can download this datasheet for OP90GP Precision Low-Voltage Micropower Op-Amp from the link given below:

See Also: CD4029 Binary-Decade Up-Down Counter – Datasheet | CD4015 Dual 4-stage Static Shift Register – Datasheet | CD4522 Programmable BCD Divide-by-N Counter – Datasheet