NE5532 Dual Low Noise Op-amp Datasheet

Contents hide

1 Introduction

2 Features of NE5532

3 NE5532 Pinout

4 Simple Preamplifier Circuit NE5532

5 Hardware Required

6 Circuit Diagram

7 Application Uses

Introduction

In this Tutorial, we will discuss the “NE5532 Dual Low Noise Op-amp Datasheet”. Because of its noise immunity and high output drive capabilities, the NE5532 Dual Low Noise Op-Amp is often employed as an amplifier in audio circuits. Internal compensation is used to provide a high unity gain with a wide output swing bandwidth, minimal distortion, and a fast slew rate.

Features of NE5532

Equivalent Input Noise Voltage: 5 nV/√Hz at 1 kHz
Unity-Gain Bandwidth: 10 MHz
Common-Mode Rejection ratio:100 dB
High dc Voltage Gain: 100 V/mV
Peak-to-Peak Output Voltage Swing: 32 V With VCC± = ±18 V and RL = 600 ΩD
High Slew Rate: 9 V/μs
Wide Supply-Voltage Range: ±3 V to±20 V

NE5532 Pinout

Pin Number	Name	Description
1	1 OUT	The output of Op-Amp A
2	1 IN-	Inverting Input of Op-Amp A
3	1 IN +	Non-Inverting Input of Op-Amp A
4	Vcc-	Ground or Negative Supply Voltage
5	2 IN +	Non-Inverting Input of Op-Amp B
6	2 IN –	Inverting Input of Op-Amp B
7	2OUT	The output of Op-Amp B
8	VCC+	Positive Supply Voltage

Simple Preamplifier Circuit NE5532

To understand the working of NE5532 IC, let’s make a simple preamplifier circuit.

Hardware Required

S.no	Component	Value	Qty
1.	IC	NE5532	1
2.	Resistor	1K, 2K, 5K, 10K	1, 1, 2, 2
3.	Capacitor	10uf	2

Circuit Diagram

Working Explanation

In this preamplifier circuit, we provide the audio at pin 3 f an Ic, which is the noninverting pin of an IC. While the output is coming from pin 1. Where the switch is connected. Different growth rates can be selected by twisting the selection switch.