Contents
hide
MCR100 SCR device is designed for high volume, line-powered consumer applications such as relay and lamp drivers, small motor controls, gate drivers for larger thyristors, and sensing and detection circuits. Supplied in an inexpensive plastic TO-226AA package which is readily adaptable for use in automatic insertion equipment.
MCR100-8 Pinout
MCR100-8 Pin Configuration
| Pin No | Pin Name |
|---|---|
| 1 | Cathode |
| 2 | Gate |
| 3 | Anode |
MCR100 Key Features
- Sensitive Gate Allows Triggering by Microcontrollers and Other Logic Circuits
- Blocking Voltage to 600 V
- On−State Current Rating of 0.8 A RMS at 80°C
- High Surge Current Capability − 10 A
- Minimum and Maximum Values of IGT, VGT and IH Specified for Ease of Design
- Immunity to dV/dt − 20 V/m sec Minimum at 110°C
- Glass-Passivated Surface for Reliability and Uniformity
- Pb−Free Packages are Available
MCR100 Specification
| Type | Vdsm (V) | Vgt (V) | It (A) | Igt (uA) |
|---|---|---|---|---|
| MCR100 | 600 | 0.8 | 0.8 | 200 |
Application
- It is used for a wide range of switching applications
- Relay and Lamp drivers
- Small Motor Controls
- Gate drivers for larger thyristors
- Sensing and Detection circuits
You can download this datasheet for MCR100 0.8A 600V SCR – Datasheet from the link given below:
