LT1097 Low Cost Low Power Precision Op-Amp – Datasheet

3,269 views

LMT1097 is a precision operational amplifier with an 8 – pin industry-standard configuration. The IC features a low offset-voltage temperature coefficient, high gain, low supply current, and low noise. The IC is available in an 8 – pin hermetically sealed dual inline IC packaging (DIP). LT1097 offers many different features such as high gain current and low voltage noise, etc.

Precision operational amplifier

A Precision operational amplifier is an operational amplifier with better design specifications and topology than the conventional op-amp. Precision Op-amps are more accurate than your average general-purpose op-amps. In terms of design topology, Precision amplifiers have a better precision offset, zero-drift over time, lower internal noise (nV/√Hz), and input bias current. On the component scale, they have precise matching resistors etched in the substrate at the chip level.

For Example; a LM741 op-amp, has an offset voltage of 5mV. The offset voltage signifies the voltage that the user has to apply between the +ve and -ve of the IC, in order to get an output of 0V. On configuring the op-amp to operate at a gain of 100. The gain will not only multiply the input signal, but it will also multiply the offset voltage. This will result in the output voltage being off-value by a factor of +/-0.5V. On considering the OP177; a precision op-amp, with an offset voltage of 25uV. The same gain value of 100, would produce an error of only 2.5mV in a signal that has been amplified by a factor of 100.

LT1097 Pinout

LT1097 Pin Configuration

Pin NoPin NameDescription
1VOS TRIMInput Offset Voltage Trim 1
2INV-INPUT AInverting Input 1
3NON-INV-INPUT ANon Inverting Input 1
4V-Negative Power Supply
5OVER COMPOver Compensation Pin
6OUTOutput Pin
7V+Positive Power Supply
8VOS TRIM Input Offset Voltage Trim 2

LT1097 Features

  • Offset Voltage 50µV Max
  • Offset Voltage Drift 1µV/°C Max
  • Bias Current 250pA Max
  • Offset Current 250pA Max
  • Bias and Offset Current Drift 4pA/°C Max
  • Supply Current 560µA Max
  • 0.1Hz to 10Hz Noise 0.5µVp-p, 2.2pAp-p
  • CMRR 115dB Min
  • Voltage Gain 117dB Min
  • PSRR 114dB Min

Application

  • High Impedance Difference Amplifiers
  • Logarithmic Amplifiers (Wide Dynamic Range)
  • Thermocouple Amplifiers
  • Precision Instrumentation
  • Active Filters (with Small Capacitors)
  • Replaces OP-07/OP-77/OP-97/OP-177/AD707/LT1001 with Improved Price/Performance

LT1097 Datasheet

You can download this datasheet for LT1097 Low Cost Low Power Precision Op-Amp from the link given below:

See Also: CD4093 Quad 2-Input NAND Schmitt Trigger – Datasheet | CD4521 24-Stage Frequency Divider – Datasheet | CD4556 Dual Binary 1 of 4 Decoder Inverter – Datasheet