LMC6462 CMOS Dual Op-Amp

Contents hide

LMC6462 is a Quad Micropower, Rail-to-Rail Input/Output CMOS Operational Amplifier. LMC6462 provides an input common-mode voltage range that exceeds both rails. The rail-to-rail output swing of the amplifier, ensured for loads down to 25 kΩ, assures maximum dynamic signal range. This rail-to-rail performance of the amplifier, combined with its high voltage gain makes it unique among rail-to-rail amplifiers.

Operational Amplifier

An operational amplifier is one of the basic building blocks for analog circuits, An operational amplifier takes in differential voltage input and produces a single-ended voltage output. The basic purpose of employing an operational amplifier in an analog circuit is to perform the function of signal amplification: The process of boosting an electrical signal of low strength to a level of higher amplitude. Op-amps also function as a filter of the input signal; meaning that, an operational amplifier is able to extract the signal with the target frequency. Op-amps can be divided into two fundamental parts:

Precision Op-amps
Differential Op-amps

LMC6462 Pinout

LMC6462 Pin Configuration

Pin No	Pin Name	Description
1	OUT A	Output Of Amplifier A
2	INV-INPUT A	Inverting Input Of Amplifier A
3	NON-INV-INPUT A	Non Inverting Input Of Amplifier A
4	V-	Negative Power Supply
5	NON-INV-INPUT B	Non Inverting Input Of Amplifier B
6	INV-INPUT B	Inverting Input Of Amplifier B
7	OUT B	Output Of Amplifier B
8	V+	Positive Power Supply