The LM2936 ultra-low quiescent current regulator features low dropout voltage and low current in the standby mode. With less than 15 µA quiescent current at a 100 µA load, the LM2936 is ideally suited for automotive and other battery-operated systems. The LM2936 retains all of the features that are common to low dropout regulators including a low dropout PNP pass device, short circuit protection, reverse battery protection, and thermal shutdown.
The LM2936 has a 40V maximum operating voltage limit, a −40˚C to +125˚C operating temperature range, and ±3% output voltage tolerance over the entire output current, input voltage, and temperature range. The LM2936 is available in a TO-92 package, a SO-8 surface-mount package, and a TO-252 surface mount power package.
LM2936 Pinout
LM2936 Pin Configuration
| Pin No | Pin Name |
|---|---|
| 1 | INPUT |
| 2 | GND |
| 3 | OUTPUT |
LM2936 Key Features
- Fixed 5V, 50 mA output
- Output tolerance ±3% over line, load, and temperature
- Dropout voltage typically 200 mV @ IO = 50 mA
- Reverse battery protection
- 50V reverse transient protection
- Internal short circuit current limit
- Internal thermal shutdown protection
- 40V operating voltage limit
Application
- Automotive System
- Battery-operated systems
You can download this datasheet for LM2936 Ultra-Low Quiescent Current 5.0V Regulator – Datasheet from the link given below:
