The LM2676 regulator is a monolithic integrated circuit that provides all of the active functions for a step-down (buck) switching regulator capable of driving up to 3A loads with excellent line and load regulation characteristics. High efficiency (>90%) is obtained through the use of a low ON-resistance DMOS power switch. The LM2676 consists of fixed output voltages of 3.3V, 5V, and 12V and an adjustable output version.
The simple switcher concept provides for a complete design using a minimum number of external components. A high fixed frequency oscillator (260KHz) allows the use of physically smaller-sized components. A family of standard inductors for use with the LM2676 is available from several manufacturers to greatly simplify the design process.
LM2676 Pinout
LM2676 Pin Configuration
Pin No | Pin Name | Description |
---|---|---|
1 | SWITCH OUTPUT | Switch Output Pin |
2 | IN | Input Pin |
3 | C BOOST | C Boost Pin |
4 | GND | Ground Pin |
5 | NC | No Connection Pin |
6 | FB | Feedback Pin |
7 | ON/OFF’ | On / Complement Off Pin |
LM2676 Key Features
- 150 mΩ DMOS output switch
- 3.3V, 5V and 12V fixed output and adjustable (1.2V to 37V ) versions
- 50µA standby current when switched OFF
- ±2%maximum output tolerance over full line and load conditions
- Wide input voltage range: 8V to 40V
- 260 KHz fixed frequency internal oscillator
- −40 to +125˚C operating junction temperature range
Application
- Simple to design, high efficiency (>90%) step-down switching regulators
- Efficient system pre-regulator for linear voltage regulators
- Battery chargers
You can download this datasheet for LM2676 Adjustable Step-Down Voltage Regulator – Datasheet from the link given below: