The LM2578A is a switching regulator which can easily be set up for such DC-to-DC voltage conversion circuits as the buck, boost, and inverting configurations. The LM2578A features a unique comparator input stage which not only has separate pins for both the inverting and non-inverting inputs but also provides an internal 1.0V reference to each input, thereby simplifying circuit design and p.c. board layout.
The output can switch up to 750 mA and has output pins for its collector and emitter to promote design flexibility. An external current limit terminal may be referenced to either the ground or the Vin terminal, depending upon the application. In addition, the LM2578A has an onboard oscillator, which sets the switching frequency with a single external capacitor from <1 Hz to 100 kHz (typical).
LM2578 Pinout
LM2578 Pin Configuration
| Pin No | Pin Name | Description |
|---|---|---|
| 1 | – IN | Negative Input Pin |
| 2 | + IN | Positive Input Pin |
| 3 | OSC | Oscillator Pin |
| 4 | GND | Ground Pin |
| 5 | EMITTER | Emitter Pin |
| 6 | COLLECTOR | Collector Pin |
| 7 | CURRENT LIMIT | Current Limit Pin |
| 8 | Vin | Input Voltage |
LM2578 Key Features
- Inverting and non-inverting feedback inputs
- 1.0V reference at inputs
- Operates from supply voltages of 2V to 40V
- Output current up to 750 mA, saturation less than 0.9V
- Current limit and thermal shut down
- Duty cycle up to 90%
Application
- Switching regulators in buck, boost, inverting, and single-ended transformer configurations
- Motor speed control
- Lamp flasher
You can download this datasheet for LM2578 Switching Regulator – Datasheet from the link given below:
