LM1036 Tone/Volume/Balance Circuit – Datasheet

3,783 views

The LM1036 is a DC-controlled tone (bass/treble), volume, and balance circuit for stereo applications in-car radio, TV, and audio systems. An additional control input allows loudness compensation to be simply effected Four control inputs provide control of the bass, treble, balance, and volume functions through application of DC voltages from a remote control system or, alternatively, from four potentiometers which may be biased from a Zener regulated supply provided on the circuit. Each tone response is defined by a single capacitor chosen to give the desired characteristic.

LM1036 Pinout

LM1036 Pin Configuration

Pin NoPin NameDescription
1INTERNAL SUPPLY DECOUPLEInternal Supply Decouple Pin
2IN 1Input Pin 1
3TREBLE CAP:1Treble Capacitor Pin 1
4TREBLE CONTROL INTreble Control Pin
5AC BYPASS 1AC Bypass Pin 1
6BASS CAP:1Bass Capacitor Pin 1
7LOUDNESS COMP: CONTROL INLoudness Compensation Control Input Pin
8OUT 1 Output Pin 1
9BALANCE CONTROL INBalance Control Input Pin
10GNDGround Pin
11VCCSupply Voltage Pin
12VOLUME CONTROL INVolume Control Input Pin
13OUT 2Output Pin 2
14BASS CONTROL INBass Control Input Pin
15 BASS CAP:2 Bass Capacitor Pin 2
16 AC BYPASS 2 AC Bypass Pin 2
17ZENER VOLTAGEZener Voltage Pin
18 TREBLE CAP:2 Treble Capacitor Pin 2
19 IN 2 Input Pin 2
20 GND Ground Pin

LM1036 Features

  • Wide Supply Voltage Range, 9V to 16V
  • Large Volume Control Range, 75 dB Typical
  • Tone Control, t15 dB Typical
  • Channel Separation, 75 dB Typical
  • Low Distortion, 0.06% Typical for An Input Level of 0.3 Vrms
  • High Signal to Noise, 80 dB Typical for an Input Level of 0.3 Vrms
  • Few External Components Required

Application

  • stereo applications
  • Car radio
  • TV
  • Audio systems

You can download this datasheet for LM1036 Tone/Volume/Balance Circuit – Datasheet from the link given below: