In this short DIY tutorial, let’s build up a LED Strobe light circuit utilizing the mainstream 555 timer IC. A strobe light or a stroboscopic light is one that can create uninterrupted flashes of light. Hence, we are fabricating this circuit by utilizing a 555 timer IC for setting the postponement between each blaze and a powerful LED lamp as the light source.
Therefore, at the end of this short DIY tutorial, you will likewise be well aware of how to utilize 555 timer IC in monostable mode and how to compute the delay time for these types of circuits.
Hardware Component
The following components are required to make LED Strobe Light Circuit
| S.no | Component | Value | Qty |
|---|---|---|---|
| 1. | IC | NE555 timer | 1 |
| 2. | Resistor | 10K, 10M Var | 1, 1 |
| 3. | Breadboard | – | 1 |
| 4. | Capacitor | 0.01uF, 0.1uF | 1, 1 |
| 5. | Connecting wires | – | 1 |
| 6. | High Power LED | – | 1 |
| 7. | Battery | 9V | 1 |
NE555 IC Pinout
For a detailed description of pinout, dimension features, and specifications download the datasheet of 555 Timer
LED Strobe Light Circuit
Circuit Operation
The circuit’s working operation is quite simple and easy—the overall circuit powers by utilizing a 9V battery. If it looks stable, it implies that it is blazing so quickly that it isn’t noticeable to the unaided eye. To continuously change the potentiometer to fluctuate how quickly it should streak. Then you can better see your LED flashes.
In this way, we have made a working LED Strobe light setup. I hope you delighted in the tutorial and made it work; if not, post your issues in the comment segment, and I will get you out.
Applications and Uses
- It is a useful device for inspection and quality control of various products without compromising on production rate.
