DS0026 is a low-cost monolithic high-speed two-phase MOS clock driver and interface circuit. Unique circuit design provides both very high-speed operation and the ability to drive large capacitive loads. The device accepts standard TTL outputs and converts them to MOS logic levels.
The DS0026 is intended for applications in which the output pulse width is logically controlled; i.e, the output pulse width is equal to the input pulse width. The DS0026 is designed to fulfill a wide variety of MOS interface requirements.
DS0026 Pinout
DS0026 Pin Configuration
| Pin No | Description |
|---|---|
| 1 | No Connection |
| 2 | Input Pin Of Driver A |
| 3 | Negative Supply Voltage |
| 4 | Input Pin Of Driver B |
| 5 | Output Pin Of Driver B |
| 6 | Positive Supply Voltage |
| 7 | Output Pin Of Driver A |
| 8 | No Connection |
DS0026 Features
- Fast rise and fall times : 20 ns 1000 pF load
- High output swing : 20V
- High output current drive : ±1.5 amps
- TTL compatible inputs
- High rep rate : 5 to 10 MHz depending on power dissipation
- Low power consumption in MOS “0” state: 2 mw
- Drives to 0.4V of GND for RAM address drive
Application
- Applications in which the output pulse width is logically controlled
You can download this datasheet for DS0026 Dual Mos Clock Driver – Datasheet from the link given below:
