The DAC712P is a complete 16-bit resolution digital-to-analog (D/A) converter with 16 bits of monotonicity over temperature. The DAC712 has a precision +10V temperature-compensated voltage reference, ±10V output amplifier, and 16-bit port bus interface. The DAC712 is available in two linearity error performance grades: ±4LSB and ±2LSB, and three differential linearity grades: ±4LSB, ±2LSB, and ±1LSB. The DAC712 is specified at power-supply voltages of ±12V and ±15V.
DAC712P Pinout
DAC712P Pin Configuration
Pin No | Pin Name | Description |
---|---|---|
1 | DCOM | Power-Supply return for digital currents |
2 | ACOM | Analog Supply Return |
3 | VOUT | D/A Output |
4 | OFFSET ADJUST | Offset Adjust (Bipolar) |
5 | Vref OUT | Voltage Reference Output |
6 | GAIN ADJUST | Gain Adjust |
7 | +VCC | Positive Supply Voltage |
8 | -VCC | Negative Supply Voltage |
9 | CLR’ | CLEAR; Sets D/A output to Bipolar Zero (Active Low) |
10 | WR’ | Write (Active Low) |
11 | A1′ | Enable for D/A latch (Active Low) |
12 | A0′ | Enable for Input latch (Active Low) |
13 | D15 (MSB) | Data Bit 15 (Most Significant Bit) |
14 | D14 | Data Bit 14 |
15 | D13 | Data Bit 13 |
16 | D12 | Data Bit 12 |
17 | D11 | Data Bit 11 |
18 | D10 | Data Bit 10 |
19 | D9 | Data Bit 9 |
20 | D8 | Data Bit 8 |
21 | D7 | Data Bit 7 |
22 | D6 | Data Bit 6 |
23 | D5 | Data Bit 5 |
24 | D4 | Data Bit 4 |
25 | D3 | Data Bit 3 |
26 | D2 | Data Bit 2 |
27 | D1 | Data Bit 1 |
28 | D0 (LSB) | Data Bit 10 (Least Significant Bit) |
DAC712P Features
- HIGH-SPEED, 16-BIT PARALLEL DOUBLE-BUFFERED INTERFACE
- VOLTAGE OUTPUT: ±10V
- 13-, 14-, AND 15-BIT LINEARITY GRADES
- 16-BIT MONOTONIC OVER TEMPERATURE (L GRADE)
- POWER DISSIPATION: 600mW max
- GAIN AND OFFSET ADJUST Convenient for Auto-Cal D/A Converters
- 28-LEAD DIP AND SOIC PACKAGES
Applications
- Audio
- Communications and Telecom
- Amplifiers
- Computers and Peripherals
- Data Converters
- DLP
- Energy and Lighting
- DSP
- Industrial
- Clocks and Timers
- Interface
You can download this datasheet for DAC712P 16-bit D/A Converter from the link given below: