Introduction
In a world where technology is advancing at lightning speed, staying connected has become essential to our daily lives. Cell phones have become an integral part of our existence, allowing us to communicate, work, and stay entertained on the go. However, the more we use our phones, the more battery power we consume. This is where a cellphone power bank circuit comes in handy. A power bank circuit allows us to charge our devices on the go without relying on wall outlets.
In this article, we will show you how to create a cellphone power bank circuit from scratch using simple and affordable materials you can find at home.
Circuit Diagram
Procedure
Connect the Charger Connector to the Battery Holder Box
After procuring the above materials, connect the charger connector pin wire ends to the points where the red/black wires are connected in the battery holder box. It is important to ensure the polarity is correct to avoid any potential damage to your cellphone. You can use a soldering iron to connect the wires securely.
Note: Do not cut or remove the existing red/black wires of the holder, as they will be used for charging the power bank when it needs a recharge.
Charge the 4 AAA Ni-Cd Cells
To charge the 4 AAA Ni-Cd cells, you can use any standard 5V adapter and connect it with the holder’s red/black wires through a 6V flashlight bulb. The 6V bulb acts as a safety mechanism to ensure the cells are never overcharged and restricts the current to a limited safe range.
Test the Power Bank Back Up Output
Once the battery pack is fully charged, you can remove the battery box from the 5V source. The power bank is now ready to charge your cellphone. You can test the power bank backup output by plugging the charging pin into your cellphone’s charging input.
Final Words
In conclusion, the cellphone power bank circuit we have shown you is a perfect example of how technology can be simple, affordable, and accessible to everyone. With just a few materials and some basic knowledge of circuits, you can create your own power bank circuit, which will keep you connected no matter where you go. By following the steps we have outlined, you will have a fully functional power bank circuit that you can use to charge your devices on the go without having to rely on wall outlets. So, what are you waiting for? Get started on your power bank circuit today and stay connected with the world around you.
