Adjustable Stabilized Power Supply 60v Using LM317HVK

13,129 views

In this tutorial, we are going to make a 1.2 – 57V Adjustable Stabilized Power Supply Using LM317HVK. This power supply is ideal to use in almost all circuits and devices because it provides both low and very high voltages.

We are using an LM317HVK voltage regulator IC. It is a three-pin positive adjustable regulator IC. Its output voltage is adjustable from 1.2V to 57V with 1.5 amperes of output current. This comes in a standard transistor package which is easily mounted and handled. This IC is very useful and convenient. It only requires external resistors to set the desired output value. Its features include low cost, minimum external parts, thermal overload protection, overload protection, and safe area protection.

LM317-Adjustable-1.5A-Positive-Regulator

Hardware Components

The following components are required to make Stabilized Power Supply Circuit

S.noComponentValueQty
1.Step-down Transformer 230V/24V 2A 1
2.Bridge Rectifier Diode3A 100V1
3.Voltage Regulator ICLM317HVK1
4.Transistor 2N30551
5.Diode1N54042
6.Electrolytic Capacitor(4700µF,10µF,100µF)100V1,1,1
7Ceramic Capacitor0.33µF
8.Resistors 220R1
9Potentiometer 10K1
10Connecting Wires1
11.Breadboard1

LM317 Pinout

lm317 adjustable voltage regulator pinout

For a detailed description of pinout, dimension features, and specifications download the datasheet of LM317

2N3055 Pinout

2N3055-Pinout

For a detailed description of pinout, dimension features, and specifications download the datasheet of 2N3055

Stabilized Power Supply Circuit

Ajustable Stabilized Power Supply Circuit

Working Explanation

Here we have used a 2 amperes transformer which steps down the mains voltage of 220V to 40V AC. This AC signal will be converted into 59V DC by passing through a bridge rectifier of 3A. A smoothing capacitor of 4700uF is used for smoothing the signal before going into the IC. The adjust pin of this voltage regulator IC is connected with a 10K ohms variable resistor, you can adjust your desired output voltage by it. A 10uF capacitor is used in the regulatory lines to prevent fluctuations of regulation. 1N5404 diodes are used to prevent the capacitor discharge which can damage the IC. There is another capacitor used before the output of this circuit to get a smooth and noise-free output voltage.

Applications and Uses

  • Automated equipment testing
  • Operational amplifiers and oscillators
  • Electronics projects and circuits
  • Electronics Laboratories