Contents
hide
The ADC0831CCN series are 8-bit successive approximation A/D converters with a serial I/O and configurable input multiplexers with up to 8 channels. The serial I/O is configured to comply with the NSC MICROWIRE serial data exchange standard for easy interface to the COPS family of processors, and can interface with standard shift registers or μPs. The 2-, 4- or 8-channel multiplexers are software configured for single-ended or differential inputs as well as channel assignment.
ADC0831CCN Pinout
ADC0831CCN Pin Configuration
| Pin Number | Pin Name | Description |
|---|---|---|
| 1 | CS | Chip Select (Active Low) |
| 2 | Vin+ | Positive Analog Voltage Input |
| 3 | Vin- | Negative Analog Voltage Input |
| 4 | GND | Ground |
| 5 | Vref | Voltage Reference |
| 6 | DO | Data Output |
| 7 | CLK | Clock |
| 8 | Vcc | Positive Supply |
ADC0831CCN Features
- Operates ratiometrically or with 5 VDC voltage reference
- No zero or full-scale adjust required
- 2-, 4- or 8-channel multiplexer options with address logic
- Shunt regulator allows operation with high voltage supplies
- 0V to 5V input range with single 5V power supply
- Remote operation with serial digital data link
- TTL/MOS input/output compatible
- 0.3″ standard width, 8-, 14- or 20-pin DIP package
- 20 Pin Molded Chip Carrier Package (ADC0838 only)
- Surface-Mount Package
ADC0831CCN Specifications
- Resolution 8 Bits
- Total Unadjusted Error ±1⁄2 LSB and ±1 LSB
- Single Supply 5 VDC
- Low Power 15 mW
- Conversion Time 32 μs
Application
- Low-Cost Remote Temperature Sensor
- Digitizing a Current Flow
- Operating with Ratiometric Transducers
You can download this datasheet for ADC0831CCN 8-bit A/D Converter with MUX (1ch) from the link given below:
