ADC0808CCN 8-bit A/D Converter

Contents hide

The ADC0808CCN data acquisition component is a monolithic CMOS device with an 8-bit analog-to-digital converter, 8-channel multiplexer and microprocessor compatible control logic. The 8-bit A/D converter uses successive approximation as the conversion technique. The converter features a high impedance chopper stabilized comparator, a 256R voltage divider with analog switch tree and a successive approximation register. The 8-channel multiplexer can directly access any of 8-single-ended analog signals.

ADC0808CCN Pinout

ADC0808CCN Pin Configuration

Pin Number	Pin Name	Description
1	IN3	Analog Input 3
2	IN4	Analog Input 4
3	IN5	Analog Input 5
4	IN6	Analog Input 6
5	IN7	Analog Input 7
6	START	Start Conversion
7	EOC	End of Conversion
8	2(-5)	Tri-State Output Bit 5
9	OUT EN	Output Enable
10	CLK	Clock
11	Vcc	Positive Supply
12	Vref+	Positive Voltage Reference Input
13	GND	Ground
14	2(-7)	Tri-State Output Bit 7
15	2(-6)	Tri-State Output Bit 6
16	Vref-	Voltage Reference Negative Input
17	2(-8)	Tri-State Output Bit 8
18	2(-4)	Tri-State Output Bit 4
19	2(-3)	Tri-State Output Bit 3
20	2(-2)	Tri-State Output Bit 2
21	2(-1)	Tri-State Output Bit 1
22	ALE	Address Latch Enable
23	ADD C	Address Input C
24	ADD B	Address Input B
25	ADD A	Address Input A
26	IN0	Analog Input 0
27	IN1	Analog Input 1
28	IN2	Analog Input 2

ADC0808CCN Features

Easy interface to all microprocessors
Operates ratiometrically or with 5 VDC or analog span adjusted voltage reference
No zero or full-scale adjust required
8-channel multiplexer with address logic
0V to 5V input range with single 5V power supply
Outputs meet TTL voltage level specifications
Standard hermetic or molded 28-pin DIP package
28-pin molded chip carrier package