Laser Tripwire Home Alarm System

Introduction

The need for a security system has arisen as a result of rising crime rates. So,  Having a security system gives you the safety and security you need to lead a peaceful life, whether it be at your house, place of employment, or apartment. All fields of life are gradually introducing new technologies. However, modern tools and devices need to be improved and changed to improve security. Thus in this article, we will make a modern Laser Tripwire Home Alarm System.

You might have played with laser toy guns in your childhood, or you may have seen the laser in various science fiction movies. And, you might have also seen the laser maze challenge game, in which when a person touches the laser, an alarm produces a sound. The same things happen in the laser tripwire alarms.

What is Laser Tripwire?

As the name indicates, Laser Tripwire employs laser technology to give a safety system to the user. Laser tripwire enables you to cover the whole area or site with such a laser security system using a variety of light beams.

PCBWay celebrates its 10th anniversary, marking a decade of excellence in PCB manufacturing. Renowned for quality and innovation, PCBWay has earned the trust of engineers and designers worldwide with its top-notch prototyping and production services. Visit PCBWay’s anniversary page to explore special promotions and order your PCBs today!

Hardware Components

You will require the following hardware for the Laser Tripwire Home Alarm System.

S.no	Component	Value	Qty
1.	Arduino UNO	–	1
2.	LDR	–	1
3.	Laser Source	–	1
4.	Buzzer	–	1
5.	LED	–	1
6.	Resistor	10KΩ	1
7.	Breadboard	–	1
8.	Jumper Wires	–	1

Steps for Making Laser Tripwire Alarm

The components of a Laser Tripwire Home Alarm System are very basic. The table above lists all of the components. Once you have got those components, proceed as follows:

Schematic

Make connections according to the circuit diagram given below.

Wiring / Connections

Arduino	LDR	Buzzer	LED
5V	1st Pin
GND	2nd Pin with R1	-Ve	-Ve
A0	2nd Pin
D9		+Ve
D3			+Ve

Installing Arduino IDE

First, you need to install Arduino IDE Software from its official website Arduino. Here is a simple step-by-step guide on “How to install Arduino IDE“.

Code

Now copy the following code and upload it to Arduino IDE Software.

const int buzzerPin = 9; 
int led = 3;
void setup() {
  Serial.begin(9600);
  pinMode(buzzerPin, OUTPUT);
  pinMode(led, OUTPUT);
}

void loop() {
  int sensorValue = analogRead(A0);
  Serial.println(sensorValue);
  while(sensorValue < 800){
    tone(buzzerPin, 50);
    delay(50);
    noTone(buzzerPin);;
    digitalWrite(led, HIGH);
    delay(100);
    digitalWrite(led,LOW);
    }
  delay(100);        
}

Let’s Test It

It’s now time to test the circuit. Power up the Arduino while the laser is incident on the LDR. Now place your hand in front of laser, and the buzzer will start to beep

Working Explanation

To understand the circuit, let’s dig into the code:

• First, we define the Arduino pins that are connected to the buzzer and LED. Also, we name those pins as buzzerPin and Led
• In the void setup, we first initialize the serial monitor. After that, we declare both led and buzzer pins as output.
• In the void loop, we provide the function analogRead(A0) to read the values coming from pin A0 which is connected to the LDR. Thus, we store that value in the integer variable sensorValue. Then we give a while condition to provide a buzzer to make a sound when the value exceeds from 800. Also, use the digitalWrite function to make LED high.

The operation is easy. When the  Laser is incident on the LDR,  The Arduino reads and stores the values of the LDR.  When someone passes across the laser, the LDR value changes, causing an alert to sound by activating the Buzzer. It will keep going until you manually press the reset button given on the Arduino.

Applications

• Intruder alarms
• Home and workplace security systems; etc

Conclusion.

We hope you have found this Laser Tripwire Home Alarm System Circuit very useful. If you feel any difficulty in making it feel free to ask anything in the comment section.