Introduction
Voltage sensors are small, wireless devices that may be connected to a wide range of machinery, and equipment. When the voltage is too high, it can put other things in jeopardy, but when the voltage is too low, it can put other things in danger. When certain thresholds are reached, warnings are delivered to a central system. So, this article is about the F031-06 Voltage Sensor
Voltage sensors are low-cost equipment that can help you improve your preventive maintenance program significantly. Sensors may give a lot of data for your industry when used. Your maintenance management team may use this data to make strategic choices regarding repairs, investments, and process improvements.
Overview of F031-06 Voltage Sensor
This F031-06 Voltage Sensor Module is a simple and handy module that reduces any input voltage by a factor of 5 using a potential divider. This enables us to use a microcontroller’s Analog input pin to monitor voltages greater than it is capable of sensing. You may measure a voltage up to 25V with a 0V – 5V Analog input range, for example. This module also incorporates handy screw terminals for quick and secure wire connections.
Features and Specifications of F031-06 Voltage Sensor
Features
- The comparator output, the signal is clean, the waveform, the driving ability to exceed 15mA
- The output in the form: Digital switching outputs (0 and 1)
- A fixed bolt hole for easy installation
- Small board PCB size: 3.2cm x 1.4cm
- The wide voltage LM393 comparator
Specifications
- Input Voltage: 0 to 25V
- Voltage Detection Range: 0.02445 to 25
- Analog Voltage Resolution: 0.00489V
- Needs no external components
- Easy to use with Microcontrollers
- Small, cheap, and easily available
- Dimensions: 4 × 3 × 2 cm
Pinout of F031-06
| Pin Name | Description |
| VCC | The positive terminal of the external voltage source (0-25V) |
| GND | The negative terminal of the External voltage source |
| S | Analog pin connected to the Analog pin of the microcontroller |
| + | Not Connected |
| – | Ground Pin connected to GND of microcontroller |
Applications
Power Failure Detection
A power outage can have disastrous consequences within a surrounding. Voltage sensors can notify management if there is a drop in voltage, which might indicate a power outage.
Energy Management
These sensors can assist a facility to improve energy generation, transmission, and utilization inside a business by delivering voltage usage statistics.
