27C020 2048K 100ns PLCC EPROM – Datasheet

The 27C020 is a 2 Megabit, ultraviolet erasable programmable read-only memory. It is organized as 256 Keywords by 8 bits per word, operates from a single +5V supply has a static standby mode, and features fast single address location programming. Products are available in windowed ceramic DIP packages, as well as plastic one-time programmable (OTP) PDIP and PLCC packages. Data can be typically accessed in less than 55 ns, allowing high-performance microprocessors to operate without any WAIT states. The device offers separate Output Enable (OE#) and Chip Enable (CE#) controls,

27C020 Pinout

27C020 Pin Configuration

Pin Number	Pin Name	Description
1	VPP	Programming Supply
2	A16	Address Input
3	A15	Address Input
4	A12	Address Input
5	A7	Address Input
6	A6	Address Input
7	A5	Address Input
8	A4	Address Input
9	A3	Address Input
10	A2	Address Input
11	A1	Address Input
12	A0	Address Input
13	DQ0	Data Input
14	DQ1	Data Input
15	DQ2	Data Input
16	VSS	Ground Pin
17	DQ3	Data Input
18	DQ4	Data Input
19	DQ5	Data Input
20	DQ6	Data Input
21	DQ7	Data Input
22	CE’	Chip Enable
23	A10	Address Input
24	OE	Output Enable
25	A11	Address Input
26	A9	Address Input
27	A8	Address Input
28	A13	Address Input
29	A14	Address Input
30	A17	Address Input
31	PGM	Programming Logic
32	Vcc	Positive Power Supply

27C020 Key Features

• Fast access time
  • Speed options as fast as 55 ns
• Low power consumption
  • 100 µA maximum CMOS standby current
• JEDEC-approved pinout
  • Plug in upgrade of 1 Mbit EPROM
  • Easy upgrade from 28-pin JEDEC EPROMs

You can download this datasheet for 27C020 2048K 100ns PLCC EPROM – Datasheet from the link given below: