The M27C010 is a 1 Mbit EPROM offered in the two ranges UV (ultra violet erase) and OTP (one-time programmable). It is ideally suited for microprocessor systems requiring large programs and is organized as 131,072 words of 8 bits. The FDIP32W (window ceramic frit-seal package) and the LCCC32W (leadless chip carrier package) have transparent lids which allow the user to expose the chip to ultraviolet light to erase the bit pattern. A new pattern can then be written to the device by following the programming procedure. For applications where the content is programmed only one time and erasure is not required, the M27C010 is offered in PDIP32, PLCC32, and TSOP32 (8 x 20 mm) packages
27C010 Pinout
27C010 Pin Configuration
Pin Number | Pin Name | Description |
---|---|---|
1 | VPP | Programming Supply |
2 | A16 | Address Input |
3 | A15 | Address Input |
4 | A12 | Address Input |
5 | A7 | Address Input |
6 | A6 | Address Input |
7 | A5 | Address Input |
8 | A4 | Address Input |
9 | A3 | Address Input |
10 | A2 | Address Input |
11 | A1 | Address Input |
12 | A0 | Address Input |
13 | Q0 | Data Input |
14 | Q1 | Data Input |
15 | Q2 | Data Input |
16 | VSS | Ground Pin |
17 | Q3 | Data Input |
18 | Q4 | Data Input |
19 | Q5 | Data Input |
20 | Q6 | Data Input |
21 | Q7 | Data Input |
22 | E’ | Chip Enable |
23 | A10 | Address Input |
24 | G | Output Enable |
25 | A11 | Address Input |
26 | A9 | Address Input |
27 | A8 | Address Input |
28 | A13 | Address Input |
29 | A14 | Address Input |
30 | NC | No Connection |
31 | P | Programming Pin |
32 | Vcc | Positive Power Supply |
27C010 Key Features
- 5V ± 10% Supply Voltage in Read Operation
- Access Time: 35ns
- Low Power Consumption:
- Active Current 30mA at 5Mhz
- Standby Current 100µA
- Programming Voltage: 12.75V ± 0.25V
- Programming Time: 100µs/word
- Electronic Signature
- Manufacturer Code: 20h
- Device Code: 05h
You can download this datasheet for 27C010 1024K 100ns PLCC EPROM – Datasheet from the link given below: