MCR100 0.8A 400V SCR – Datasheet

MCR100 SCR device is designed for high volume, line-powered consumer applications such as relay and lamp drivers, small motor controls, gate drivers for larger thyristors, and sensing and detection circuits. Supplied in an inexpensive plastic TO-226AA package which is readily adaptable for use in automatic insertion equipment.

MCR100 Pinout

MCR100 Pin Configuration

Pin No	Pin Name
1	Cathode
2	Gate
3	Anode

MCR100 Key Features

• Sensitive Gate Allows Triggering by Microcontrollers and Other Logic Circuits
• Blocking Voltage to 600 V
• On−State Current Rating of 0.8 A RMS at 80°C
• High Surge Current Capability − 10 A
• Minimum and Maximum Values of IGT, VGT and IH Specified for Ease of Design
• Immunity to dV/dt − 20 V/m sec Minimum at 110°C
• Glass-Passivated Surface for Reliability and Uniformity
• Pb−Free Packages are Available

MCR100 Specification

Type	Vdsm (V)	Vgt (V)	It (A)	Igt (uA)
MCR100	400	0.8	0.8	200

Application

• It is used for a wide range of switching applications
• Relay and Lamp drivers
• Small Motor Controls
• Gate drivers for larger thyristors
• Sensing and Detection circuits

You can download this datasheet for MCR100 0.8A 400V SCR – Datasheet from the link given below: