The DAC0832LCN is an advanced CMOS/Si-Cr 8-bit multiplying DAC designed to interface directly with the 8080, 8048, 8085, Z80, and other popular microprocessors. A deposited silicon-chromium R-2R resistor ladder network divides the reference current and provides the circuit with excellent temperature tracking characteristics (0.05% of Full Scale Range maximum linearity error over temperature). The circuit uses CMOS current switches and control logic to achieve low power consumption and low output leakage current errors. Special circuitry provides TTL logic input voltage level compatibility.
DAC0832LCN Pinout
DAC0832LCN Pin Configuration
Pin Number | Pin Name | Description |
---|---|---|
1 | CS | Chip Select (Active Low) |
2 | WR | Write (Active Low) |
3 | GND | Ground |
4 | DIN3 | Digital Input 3 |
5 | DIN2 | Digital Input 2 |
6 | DIN1 | Digital Input 1 |
7 | DIN0 | Digital Input 0 |
8 | Vref | Voltage Reference |
9 | Rfb | Feedback Resistor |
10 | GND | Ground |
11 | IOUT1 | Current Output 1 |
12 | IOUT2 | Current Output 2 |
13 | DIN7 | Digital Input 7 |
14 | DIN6 | Digital Input 6 |
15 | DIN5 | Digital Input 5 |
16 | DIN4 | Digital Input 4 |
17 | XFER | Transfer Control Signal (Active Low) |
18 | WR2 | Write 2 (Active Low) |
19 | ILE | Input Latch Enable |
20 | Vcc | Positive Supply |
DAC0832LCN Features
- Double-buffered, single-buffered or flow-through digital data inputs
- Easy interchange and pin-compatible with 12-bit DAC1230 series
- Direct interface to all popular microprocessors
- Linearity specified with zero and full scale adjust only
- Works with ±10V reference-full 4-quadrant multiplication
- Can be used in the voltage switching mode
- Logic inputs which meet TTL voltage level specs (1.4V logic threshold)
- Operates “STAND ALONE” (without μP) if desired
- Available in 20-pin small-outline or molded chip carrier package
DAC0832LCN Key Specification
- Current settling time: 1 μs
- Resolution: 8 bits
- Linearity: 8, 9, or 10 bits (guaranteed over temp.)
- Gain Tempco: 0.0002% FS/°C
- Low power dissipation: 20 mw
- Single power supply: 5 to 15 VDC
Application
- High Speed System
You can download this datasheet for DAC0832LCN 8-bit D/A Converter with Double Buffer from the link given below: