DAC0831LCN 8-bit D/A Converter – Datasheet

1,683 views

The DAC0831LCN is an advanced CMOS/Si-Cr 8-bit multiplying DAC designed to interface directly with the 8080, 8048, 8085, Z80, and other popular microprocessors. A deposited silicon-chromium R-2R resistor ladder network divides the reference current and provides the circuit with excellent temperature tracking characteristics (0.05% of Full Scale Range maximum linearity error over temperature). The circuit uses CMOS current switches and control logic to achieve low power consumption and low output leakage current errors. Special circuitry provides TTL logic input voltage level compatibility.

DAC0831LCN Pinout

DAC0831 Pin Configuration

Pin NumberPin NameDescription
1CS Chip Select (Active Low)
2WR Write (Active Low)
3GND Ground
4DIN3 Digital Input 3
5DIN2 Digital Input 2
6DIN1 Digital Input 1
7DIN0 Digital Input 0
8Vref Voltage Reference
9Rfb Feedback Resistor
10GND Ground
11IOUT1 Current Output 1
12IOUT2 Current Output 2
13DIN7 Digital Input 7
14DIN6 Digital Input 6
15DIN5 Digital Input 5
16DIN4 Digital Input 4
17XFER Transfer Control Signal (Active Low)
18WR2 Write 2 (Active Low)
19ILE Input Latch Enable
20Vcc Positive Supply

DAC0831LCN Features

  • Double-buffered, single-buffered or flow-through digital data inputs
  • Easy interchange and pin-compatible with 12-bit DAC1230 series
  • Direct interface to all popular microprocessors
  • Linearity specified with zero and full scale adjust only—NOT BEST STRAIGHT LINE FIT.
  • Works with ±10V reference-full 4-quadrant multiplication
  • Can be used in the voltage switching mode
  • Logic inputs which meet TTL voltage level specs (1.4V logic threshold)
  • Operates “STAND ALONE” (without μP) if desired
  • Available in 20-pin small-outline or molded chip carrier package

DAC0831LCN Key Specification

  • Current settling time: 1 μs
  • Resolution: 8 bits
  • Linearity: 8, 9, or 10 bits (guaranteed over temp.)
  • Gain Tempco: 0.0002% FS/°C
  • Low power dissipation: 20 mw
  • Single power supply: 5 to 15 VDC

Application

  • Controlling Mutiple DACs
  • Single-Buffered Operation

You can download this datasheet for DAC0831LCN 8-bit D/A Converter from the link given below: