Contents
hide
The SN75173 is a monolithic quadruple differential line receiver with 3-state outputs. The standard is balanced for multipoint bus transmission at rates up to 10 megabits per second. The four receivers share two OR enable inputs, one active when high, the other active when low. The device features have high input impedance, input hysteresis for increased noise immunity, and input sensitivity of ±200 mV over a common-mode input voltage range of –12 V to 12 V.
75173 Pinout
75173 Pin Configuration
Pin No | Pin Name | Description |
---|---|---|
1 | 1B | Input Pin 1B |
2 | 1A | Input Pin 1A |
3 | 1Y | Output Pin 1Y |
4 | G | Enable Pin |
5 | 2Y | Output Pin 2Y |
6 | 2A | Input Pin 2A |
7 | 2B | Input Pin 2B |
8 | GND | Ground Pin |
9 | 3B | Input Pin 3B |
10 | 3A | Input Pin 3A |
11 | 3Y | Output Pin 3Y |
12 | G’ | Inverse Enable Pin |
13 | 4Y | Output Pin 4Y |
14 | 4A | Input Pin 4A |
15 | 4B | Input Pin 4B |
16 | VCC | Collector Supply Voltage |
75173 Key Features
- Designed for Multipoint Bus Transmission on Long Bus Lines in Noisy Environments
- 3-State Outputs
- Common-Mode Input Voltage Range of –12 V to 12 V
- Input Sensitivity ±200 mV
- Input Hysteresis 50 mV Typ
- High Input Impedance 12 kΩ Min
- Operate From Single 5-V Supply
- Low Power Requirements
- Pin-to-Pin Replacement for AM26LS32
Application
- Military and Defense Applications
You can download this datasheet for 75173 Quadruple Differential Line Receiver from the link given below: