Contents
hide
The 26LS30 Dual Differential RS422 RS423 Line Driver is a low-power Schottky set of line drivers which can be configured as two differential drivers which comply with EIA−422−A standards, or as four single−ended drivers which comply with EIA−423−A standards. A mode select pin and appropriate choice of power supplies determine the mode. Each driver can source and sink currents in excess of 50 mA.
26LS30 Pinout
26LS30 Pin Configuration
| Pin No | Pin Name | Description |
|---|---|---|
| 1 | VCC | Collector Supply Voltage |
| 2 | IN A | Input A |
| 3 | IN B/ EN’ AB | Inverse Input B |
| 4 | MODE | Mode Pin |
| 5 | GND | Ground Pin |
| 6 | IN C/ CD | Inverse Input C |
| 7 | IN D | Input D |
| 8 | VEE | Emitter Supply |
| 9 | SR-D | Serial Pin D |
| 10 | OUT D | Output D |
| 11 | OUT C | Output C |
| 12 | SR-C | Serial Pin C |
| 13 | SR-B | Serial Pin B |
| 14 | OUT B | Output B |
| 15 | OUTA | Output A |
| 16 | SR-A | Serial Pin A |
26LS30 Key Features
- High Impedance Outputs in Differential Mode
- Short Circuit Current Limit In Both Source and Sink Modes
- ±10 V Common Mode Range on High Impedance Outputs
- ±15 V Range on Inputs
- Low Current PNP Inputs Compatible with TTL, CMOS, and MOS Outputs
- Individual Output Slew Rate Control in Single−Ended Mode
- Pb−Free Packages are Available
You can download this datasheet for 26LS30 Dual Differential RS422, RS423 Line Driver from the link given below:
