Audio Amplifier Circuit using 2SC5200 Power Transistor

15,746 views

Introduction

Audio amplifiers are circuits that transform low-power input audio signals into high-power audio signals at the output. The purpose of the circuits is to provide a noise-free, efficient, and low distorted audio signal with greater magnitude at the output. Different devices use different kinds of audio amplifiers. The amplifier devices usually have two stages, a pre-amplifier that only amplifies voltage gain and not the current gain, and a power amplifier that necessitates power modification of the audio signal. So, this article is about making a power amplifier using a 2SC5200 Power transistor.

Primarily, amplifiers are the circuits that boost the input power of the system at the output. Audio amplifiers enhance the audio amplitude of input signals. The amplification at the output can be understood by the gain of the circuit. Consequently, the power gain of any amplifier is greater than one. Amplifiers are classified into pre-amplifier and power amplifiers. Power amplifiers are further divided into so many other types. So, in this article, we will discuss audio power amplifiers.

audio amplifier pcb 2sc5200

PCBWay commits to meeting the needs of its customers from different industries in terms of quality, delivery, cost-effectiveness, and any other demanding requests. As one of the most experienced PCB manufacturers in China. They pride themselves to be your best business partners as well as good friends in every aspect of your PCB needs.

Hardware Components

The following components are required to make Audio Amplifier Circuit

S.noComponentValueQty
1.PCB1
2.Transistor2SC52001
3.Resistor1K1
4.Capacitor1000uf1
5.Power supply12V1
6.2 port input terminal2
7.Speaker1
8.Potentiometer100k1
1

2SC5200 Pinout

2SC5200 Pinout

For a detailed description of pinout, dimension features, and specifications download the datasheet of 2SC5200

Audio Amplifier Circuit

Working Explanation

The circuit gets turned on by supplying the 12v DC power and starts working when audio input is given through a computer, smartphone, or a device like that. The capacitor that is connected at the base of the transistor blocks the DC component, and the potentiometer control the input voltage. Hence, the AC signal is generated at the base of the transistor which works as the control signal. The collector of the transistor drives the output load, that is the speaker.

Application and Uses

  • Public addressing systems.
  • Audio instruments.
  • Sound reinforcement system, etc.