LM6132 comprises of two industry-standard, frequency compensated high gain, low power operational amplifier. LM6132 can be driven at voltages that exceed both power supply rails, thus eliminating concerns over exceeding the common-mode voltage range. The rail-to-rail output swing capability provides the maximum possible dynamic range at the output. This is particularly important when operating on low supply voltages. The LM6132/34 can also drive large capacitive loads without oscillating. The IC is available in an 8 – pin hermetically sealed dual inline IC packaging (DIP). LM6132 possesses direct compatibility with almost every CMOS, NMOS, and PMOS device.
Operational Amplifier
Operational amplifiers are simple electronic circuits that can boost a weak signal to a level of higher amplitude. An operational amplifier is generally used in applications such as home entertainment systems, megaphones, speakers, and microphones, etc. An op-amp usually operates with a number of feedback components that determine the resulting function or “operation” of the amplifier and by virtue of the different feedback, configurations whether resistive, capacitive, or both.
LM6132 Pinout
LM6132 Pin Configuration
| Pin No | Pin Name | Description |
|---|---|---|
| 1 | OUT A | Output Of Amplifier A |
| 2 | INV-INPUT A | Inverting Input Amplifier A |
| 3 | NON-INV-INPUT A | Non Inverting Input Amplifier A |
| 4 | V- | Negative Power Supply |
| 5 | NON-INV-INPUT B | Non Inverting Input Amplifier B |
| 6 | INV-INPUT B | Inverting Input Amplifier B |
| 7 | OUT B | Output Of Amplifier B |
| 8 | V+ | Positive Power Supply |
LM6132 Features
- Rail-to-Rail input CMVR −0.25V to 5.25V
- Rail-to-Rail output swing 0.01V to 4.99V
- High gain-bandwidth, 10 MHz at 20 kHz
- Slew rate 12 V/µs
- Low supply current 360 µA/Amp
- Wide supply range 2.7V to over 24V
- CMRR 100 dB
- Gain 100 dB with RL = 10k
- PSRR 82 dB
Application
- Battery operated instrumentation
- Instrumentation Amplifiers
- Portable scanners
- Wireless communications
- Flat panel display driver
LM6132 Datasheet
You can download this datasheet for LM6132 Low Power 10MHz Dual Operational Amplifier from the link given below:
See Also: CD4098 CMOS/MOS Dual Monostable Multivibrator – Datasheet | CD4034 8-Stage Bidirectional Bus Register – Datasheet | CD4050 Hex Buffer Converter (N-inverting) – Datasheet
