Contents
hide
The SN75158 is a dual differential line driver designed to satisfy the requirements set interface specifications. The outputs provide complementary signals with high-current capability for driving balanced lines, such as twisted pairs, at normal line impedance without high power dissipation. The output stages are TTL totem-pole outputs providing a high-impedance state in the power-off condition.
75158 Pinout
75158 Pin Configuration
| Pin No | Pin Name | Description |
|---|---|---|
| 1 | 1Z | Input Pin 1Z |
| 2 | 1Y | Input Pin 1Y |
| 3 | 1A | Output Pin1A |
| 4 | GND | Ground Pin |
| 5 | 2A | Output Pin1A |
| 6 | 2Y | Input Pin 2Y |
| 7 | 2Z | Input Pin 2Z |
| 8 | VCC | Collector Supply Voltage |
75158 Key Features
- Single 5-V Supply
- Balanced-Line Operation
- TTL Compatible
- High Output Impedance in Power-Off Condition
- High-Current Active-Pullup Outputs
- Short-Circuit Protection
- Dual Channels
- Input Clamp Diodes
You can download this datasheet for 75158 Dual Differential Line Driver from the link given below:
