2816A-25 16K 250ns Parallel EEPROM – Datasheet

The 2816A is a CMOS 16K non-volatile Electrically Erasable PROM. The 2816A is accessed like a static RAM for the read or write cycles without the need for external components. During a “byte write”, the address and data are latched internally, freeing the microprocessor address and data bus for other operations. Following the initiation of a write cycle, the device will go to a busy state and automatically clear and write the latched data using an internal control timer. A complete family of packages is offered to provide the utmost flexibility in applications.

2816A Pinout

2816A Pin Configuration

Pin No	Pin Name	Description
1	A7	Address Pin 7
2	A6	Address Pin 6
3	A5	Address Pin 5
4	A4	Address Pin 4
5	A3	Address Pin 3
6	A2	Address Pin 2
7	A1	Address Pin 1
8	A0	Address Pin 0
9	I/O 0	Data Inputs/Outputs 0
10	I/O 1	Data Inputs/Outputs 1
11	I/O 2	Data Inputs/Outputs 2
12	GND	Ground Pin
13	I/O 3	Data Inputs/Outputs 3
14	I/O 4	Data Inputs/Outputs 4
15	I/O 5	Data Inputs/Outputs 5
16	I/O 6	Data Inputs/Outputs 6
17	I/O 7	Data Inputs/Outputs 7
18	CE’	Chip Enable Pin
19	A10	Address Pin 10
20	OE’	Output Enable
21	WE’	Write Enable Pin
22	A9	Address Pin 9
23	A8	Address Pin 8
24	VCC	Supply Voltage Pin

2816A Key Feature

• Fast Read Access Time—150 ns
• CMOS Technology for Low Power Dissipation
  • 30 mA Active
  • 100 µA Standby
• Fast Byte Write Time—200 µs or 1 ms
• Data Retention >200 years
• High Endurance – Minimum 104 Erase/Writ
• Automatic Write Operation
  • Internal Control Timer
  • Auto-Clear Before Write Operation
  • On-Chip Address and Data Latches
• Data polling
• Chip Clear Operation
• Electronic Signature for Device Identification
• 5-Volt-Only Operation
• Organized 2Kx8 JEDEC Standard Pinout
• 24-pin Dual-In-Line Package
• 32-pin PLCC Package
• 28-pin Thin Small Outline Package (TSOP) 8x20mm

You can download this datasheet for 2816A-25 16K 250ns Parallel EEPROM – Datasheet from the link given below: