Contents
hide
The 24LC16B is a 16Kbit Electrically Erasable PROM. The device is organized as eight blocks of 256 x 8-bit memory with a 2-wire serial interface. Low voltage design permits operation down to 2.5 volts with standby and active currents of only 5 µA and 1 mA respectively. The 24LC16B also has a page-write capability for up to 16 bytes of data. The 24LC16B is available in the standard 8-pin DIP and both 8-lead and 14-lead surface mount SOIC packages.
24LC16 Pinout
24LC16 Pin Configuration
Pin No | Pin Name | Description |
---|---|---|
1 | A0 | User Configurable Chip Select |
2 | A1 | User Configurable Chip Select |
3 | A2 | User Configurable Chip Select |
4 | VSS | Ground Pin |
5 | SDA | Serial Data Pin |
6 | SCL | Serial Clock Pin |
7 | WP | Write Protect Pin |
8 | VCC | Power Supply Pin |
24LC16 Key Features
- Single supply with operation down to 1.8V
- Low-power CMOS technology:
- 1 mA active current, typical
- 1 uA standby current, typical (l-temp)
- Organized as 4 blocks of 256 bytes (4 x 256 x8)
- 2-wire serial interface bus, 1cTM compatible
- Schmitt Trigger inputs for noise suppression
- Output slope control to eliminate ground bounce
- 100 KHz (<2.5V) and 400 kHz (22.5V) compatibility
- Self-timed write cycle (including auto-erase)
- Page write buffer for up to 16 bytes
- 2 ms typical write cycle time for page write
- Hardware write-protect for entire memory
- Can be operated as a serial ROM
- Factory programming (QTP) available .
- ESD protection> 4,000V
- 1,000,000 erase/write cycles
You can download this datasheet for 24LC16B 2kx8 Microchip Serial EEPROM – Datasheet from the link given below: