The 24FC1025 is a 128K x 8 (1024Kbit) Serial Electrically Erasable PROM, capable of operation across a broad voltage range (1.7V to 5.5V). It has been developed for advanced, low-power applications such as personal communications or data acquisition. This device has both byte write and page write capability of up to 128 bytes of data. This device is capable of both random and sequential reads. Reads may be sequential within address boundaries 0000h to FFFFh and 10000h to 1FFFFh. Functional address lines allow up to four devices on the same data bus. This allows for up to 4 Mbits total system EEPROM memory. This device is available in the standard 8-pin PDIP and SOIJ packages
24FC1025 Pinout
24FC1025 Pin Configuration
Pin No | Pin Name | Description |
---|---|---|
1 | A0 | User Configurable Chip Select |
2 | A1 | User Configurable Chip Select |
3 | A2 | User Configurable Chip Select |
4 | VSS | Ground Pin |
5 | SDA | Serial data Pin |
6 | SCL | Serial Clock Pin |
7 | WP | Write Protect Input Pin |
8 | VCC | Power Supply Pin |
24FC1025 Key Feature
- Single Supply with Operation Down to 1.7V for
- 24AA256 and 24FC256 Devices, 2.5V for 24LC256 Devices
- Low-Power CMOS Technology:
- Active current 400 uA, typical
- Standby current 100 nA, typical
- 2-Wire Serial Interface, I2C Compatible
- Cascadable up to four Devices
- Schmitt Trigger Inputs for Noise Suppression
- Output Slope Control to Eliminate Ground Bounce
- 100 kHz and 400 kHz Clock Compatibility
- Page Write Time 5 ms max.
- Self-Timed Erase/Write Cycle
- 64-Byte Page Write Buffer
- Hardware Write-Protect
- ESD Protection >4000V
- More than 1 Million Erase/Write Cycles
- Data Retention >200 years
- Factory Programming Available
- Packages Include 8-lead PDIP, SOIC, DFN, TSSOP and MSOP
- Pb-Free and RoHS Compliant
You can download this datasheet for 24FC1025 128kx8 Microchip Serial EEPROM – Datasheet from the link given below: