In this project, we are making a “mini LED light”. LED is an abbreviation of a “light-emitting diode”. LED lights are 90% more powerful than the old light bulbs and even more efficient than the traditional energy savers which were used instead of light bulbs to save electricity.
An electrical flow passes through a microchip, which enlightens the small light sources we call LEDs and the outcome is obvious light. The heat produced from the LEDs is absorbed into a heat sink which helps in preventing performance issues. A mini LED light is a very small LED light used where not much amount of lighting is required.
Hardware Components
The following components are required to make LED Light Circuit
LED Pinout
For a detailed description of pinout, dimension features, and specifications download the datasheet for the LED
Circuit Construction
Step# 01
Take an LED and cut the LED’s negative side.
Step# 02
Connect the resistor with the negative side of an LED by using the soldering iron.
Step# 03
Connect the wires with both the terminals of an LED by using the soldering iron.
Step# 04
Connect the LED with the 2-Pin Plug by using a screwdriver.
Step# 09
Now cover the 2-Pin plug
Step# 08
Now cover the LED with LED cover by using Glue.
Step# 07
Now test the circuit by plugging it in on the switchboard.
Working Explanation
Now, we will talk about the circuit of a “mini LED light”. This is one of the easiest circuits for making an LED light and requires a few low-cost components. In this circuit, we have used some components like an LED of blue color, 47K resister, 2pin plug, red and black wires, and LED cover. The resistor is used at the anode for resisting the high amount of current passing through the LED and the LED cover is used to disperse the lighting in the whole room.
Applications and Uses
Mini LED light is a very “small LED light” that is used where a small amount of lighting is required.
